Wall Mounted IW-25-5 ON Wall Dehumidifier with Bi-Polar Ion Generator
Quiet | Sleek | Tankless | ON Wall Dehumidifier
Designed for multi-family and residential housing.
The patent pending IW-25-5 On Wall Dehumidifier with combined Bi-Polar Ionization Technology controls excessive moisture that contributes to poor indoor air quality, property damage, mold, comfort complaints, and possible liability risks. The IW25-5 on wall dehumidification system helps lower indoor relative humidity helping prevent moisture issues. * The quiet and easy-to-install built-in dehumidifier system is suited for both new construction and retrofit installations in multifamily, hotels, student housing, office, and residential applications. Removes up to 33 pints per day (@80°F and 60%RH) in 1,500 square feet. *
HOW IT WORKS?
The IW-25-5 ON WALL Dehumidifier utilizes its integral humidistat to monitor the conditioned space. When the relative humidity goes above the selected setpoint, the dehumidifier will energize. As air is drawn across an evaporator coil. This means moisture will condense out of the air. The air is then reheated through the condenser coil and distributed back into the room.
INSTALLATION?
The built-in IW25-5 ON-Wall dehumidifier is designed for direct surface wall mounting on surfaces including CMU block, masonry, concrete, brick, etc.
WHAT’S IN THE BOX?
The IW-25-5 ON Wall dehumidifier includes the IW-25-5 dehumidifier with bi-polar ionizer, 1 ON Wall front cover, 1 ON Wall washable air filter, 1 drain hose, and clamp, 1 power cord, 1 front cover tool, 1 set of tamper-resistant screws, and 1 Operations Manual. All dehumidifier parts are included with the purchase. The mounting screws are not provided with purchase because the type will vary based on mounting surface. Our team is available to help find the best fit for the IW25-5 On-Wall Dehumidifier.
Accessories
Dimensions:
On Wall Unit Base: 27.625” x 14.25” x 5.75”
ON Wall Cover: 27.5” x 14.125” x 1.5”
ON Wall Key Holes Distance: 3.125″
ON Wall Unit & Cover: 27.625” x 14.25” x 7.25”
IW25-5 Condensate Pump
IW25-5 Washable MERV Air Filter Replacement
Key Attributes:
• Energy Star Certified***
• 5-Year Warranty – Parts and Labor
• NGBS Green Certified
• Bi-polar ionizer – UL 2998 Validation Badge for Zero Ozone Emissions
• Quiet and Easy Installation
• Stand Alone – Independent of HVAC Systems
• Hangs ON WALL
• Hands-Free and Tankless – drains into existing plumbing
• Standard 120V plug-in or Hard Wire Capable
• Washable Air Filter – MERV
• Minimal Maintenance
• LED Maintenance Light Reminder
• Tamper Proof
• Hard Wire or standard 120V plug-in
• Internal Condensate Pump Available
Innovative Dehumidifier Systems – the pioneers of built-in, supplemental dehumidification.
*Layout and moisture conditions vary in every apartment / home; in typical conditions, the IW25-5 ON-wall dehumidifier can maintain the RH of 59% or less but is not guaranteed. Moisture removal will vary in relation to dehumidifier’s power, temperature, and relative humidity. Amp draw varies at different climate conditions.
**47 dBA is tested in a controlled environment; levels may vary due to install and install location.
***Meets Energy Star standard (@65℉/60%RH) – 21 ppd/1.64 L/kWh
Specifications and Downloads
Product Specs and Downloads
| On Wall Base Unit | 27.625” x 14.25” x 5.75” |
| On Wall Unit / Cover | 27.625” x 14.24” x 7.25” |
| Keyhole Mount Distance | 3.125 |
| Weight | 39 lbs |
| Water Removal @ 80⁰F/60% RH | Up to 33 PPD |
| Water Removal @ 65⁰F/60% RH | Up to 21 PPD |
| Energy Factor @ 80⁰F/60% RH | 1.65 L/kWh |
| Energy Factor @ 65⁰F/60% RH | 1.92 L/kWh |
| Spaced For | 1,500 sq. ft. |
| Air Flow (with clean air filter) | 120 cfm |
| Sound Pressure Level | 47 dBA |
| Operating Temperature Range | 46-95⁰F |
| Functioning Relative Humidity Range | 36-90% |
| Warranty | 5 Years on Parts & Labor |
| Drain Connection Length | 10′ |
| Drain Connection Diameter | ¾” O.D. |
| Refrigerant | R32; 155g |
| Supply Voltage | 120 VAC/60 Hz |
| Rated Average Power Consumption | 300 Watts @80⁰F/60% RH |
| Max Power Consumption | 440 Watts @90⁰F/95% RH |
| Max Absorbed Current F.L.A | 2.8 Amps @80⁰F/60% RH |
| Locked Rotor Current L.R.A. | 13.2 Amps |
| Ion Output | 3,000,000/cc |
| Test Condition | 20Cm; Wind Speed 1m/s |
| Ion Type | Bi-Polar/Positive and Negative Ions |
| Input Voltage | Input Voltage |